![]() ![]() If the connected controller is active for more than 5 to 10 seconds, we can treat that the connection is stable and you don’t need to worry about it.Select the controller and enter the pin “0000” if asked for a pin.Turn on Bluetooth on your Windows pc and hit “Add Device” or “Search For A Device” option.Press the controller buttons to put it into the Pairing Mode.Otherwise, you may try to connect your controller via bluetooth. If you can see the controller under devices section, you are good to go.If evveyrthing is fine, connect it now and go to Devices and Printers section by following the path Control Panel > All Control Panel Items > Devices and Printers.You should also check the port of your controller before you connect it again.In case if there is a problem with the USB Port, change the port and connect it again. Make sure to also check the USB Port of your pc.Check the USB Cable once before you connect the controller to your pc again now.Disconnect your controller from your personal computer (if you’ve connected via bluetooth connection).Remove the USB cable from the PC and from the controller (if you’ve connected via usb connection).In case if there is any problem with the connection (USB Cable or Bluetooth connection), you will not be able to see it there.ĭon’t worry, you can fix it by following the below tips if you can’t see your controller like in the above image. If your controller is connected to your pc properly, you will be able to see it in the Windows’s Devices and Printers section. Restart your personal computer to apply the changes and you are done.Type winmgmt /resetrepository into the command prompt and hit enter.If you wish to continue, type Y and hit enter. ![]() Type net stop winmgmt in the command prompt and hit enter.To do that, press Windows Key + R, type cmd and hit enter to launch the command prompt on your pc. Otherwise, you can run windows os’s WMI Repository Repair Commands.That will definitely solve the issue if carried properly.Then, try to repair windows installation fix by using the microsoft windows installation media. In case if you find “Attempting to start the service winmgmt failed”or “Windows Management Interface not found”in the app’s log file or windows’s event view.Launch the log file and see if you can find something about the issue.Hit Windows Key + R, type %appdata% and hit enter. App data folder can be opened with a run command.Main folder can be found where you have saved it.You can find the logs in two different places such as 1.Inspecting the log files will give you clear idea about what causing it and how you can handle it.DS4Win’s log will show you the warnings whenever there is an issue that prevents the tool to work normally.DS4Win may not work on older operating systems. The operating system on your pc must be either Windows 8.1 or Windows 10 or Windows 11.If you have already installed it for using the 360 controller, you don’t have to install it again. Microsoft 360 Driver is yet another must have driver for DualShock 3/4 and DualSense as well.If the ViGEmBus driver ask you to install Visual C++ 2017 runtime libraries, you will have to install it. In case if you’ve installed it but still getting the log message, uninstall it first and restart your pc before you re-install it. If you haven’t installed it the tool finds it difficult to detect the installed driver, you may see an error message “ViGEmBus Is Not Installed”. ViGEmBus Driver is another must have requirement.Download 圆4 Bit version or x86 (32 Bit) version. Visual C++ 2015-2019 Redistributable is required.So, download and install the desktop version (圆4 or x86 bit) based on your system architecture. The console version and server version will not work. Check if you have installed Microsoft.Make sure that all the below mentioned prerequisites are installed and correctly configured. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |